Control panel
("pistons") in keyboard mode |
|
Switch (keypad) |
Function |
S0 - S63
(64 switches) |
Ordinary (third) manual keypads. |
Switches (keypads) labels correspond to diode
matrix schematic.
Control panel ("pistons")
in control mode |
|
Switch (keypad) |
Function |
|
Couplers |
S0 |
Straight coupler RP
-> HW. Play at main manual
is straight transferred to secondary manual. |
S1 |
Straight coupler HW
-> Pedalboard. Play at pedalboard
is straight transferred to main manual. |
S2 |
Straight coupler RP
-> Pedalboard. Play at pedalboard
is straight transferred to secondary manual. |
S3 |
SuperCoupler
SuperHW->HW. Play at main manual
is played at main manual again, but over one octave higher. |
S4 |
SubCoupler
SubHW->HW. Play at main manual
is played at main manual again, but over one octave lower. |
S5 |
SuperCoupler
SuperRP->HW. Play at main manual
is played at secondary manual too, but over one octave higher. |
S6 |
SubCoupler
SubRP->HW Play at main manual
is played at secondary manual too, but over one octave lower. |
S7 |
SuperCoupler
SuperRP->RP Play at secondary
manual is played at secondary manual again, but over one octave higher. |
|
Couplers |
S8 |
SubCoupler
SubRP->RP Play at secondary
manual is played at secondary manual again, but over one octave lower. |
S9 |
Inverse coupler
Pedalboard->HW. Only the lowest note
of main manual play is played in pedalboard too. |
S10 |
--- |
S11 |
--- |
S12 |
--- |
S13 |
--- |
S14 |
--- |
S15 |
--- |
|
Couplers |
S16 |
--- |
S17 |
--- |
S18 |
--- |
S19 |
--- |
S20 |
--- |
S21 |
--- |
S22 |
Unison off HW Main manual basic
note disable. This function, when
activated, turn off basic note of pressed keypad. All active couplers are
unaffected. Note: When this function is activated and no any
coupler is active, no sound (no data) is generated by main manual. |
S23 |
Unison off RP Secondary manual
basic note disable. This function, when
activated, turn off basic note of pressed keypad. All active couplers are
unaffected. Note: When this function is activated and no any
coupler is active, no sound (no data) is generated by secondary manual. |
|
Manual
A (HW) Program change (voice change)5) |
S24 |
Program change 17 -
Drawbar Organ |
S25 |
Program change 18 -
Percussive Organ |
S26 |
Program change 19 -
Rock Organ |
S27 |
Program change 20 -
Church Organ |
S28 |
Program change 21 -
Reed Organ |
S29 |
Program change 22 -
Accordian |
S30 |
Program change 23 -
Harmonica |
S31 |
Program change 24 -
Tango Accordian |
|
Manual
B (RP) Program change (voice change)5) |
S32 |
Program change 17 -
Drawbar Organ |
S33 |
Program change 18 -
Percussive Organ |
S34 |
Program change 19 -
Rock Organ |
S35 |
Program change 20 -
Church Organ |
S36 |
Program change 21 -
Reed Organ |
S37 |
Program change 22 -
Accordian |
S38 |
Program change 23 -
Harmonica |
S39 |
Program change 24 -
Tango Accordian |
|
Pedalboard
Program change (voice change)5) |
S40 |
Program change 17 -
Drawbar Organ |
S41 |
Program change 18 -
Percussive Organ |
S42 |
Program change 19 -
Rock Organ |
S43 |
Program change 20 -
Church Organ |
S44 |
Program change 21 -
Reed Organ |
S45 |
Program change 22 -
Accordian |
S46 |
Program change 23 -
Harmonica |
S47 |
Program change 24 -
Tango Accordian |
|
Transpose6) |
S48 |
Manual A - one
octave down |
S49 |
Manual A - one
octave up |
S50 |
Manual B - one
octave down |
S51 |
Manual B - one
octave up |
S52 |
Pedalboard - one
octave down |
S53 |
Pedalboard - one
octave up |
S54 |
Entire organ system
- one half-tone down |
S55 |
Entire organ system
- one half-tone up |
|
|
S56 |
--- |
S57 |
--- |
S58 |
--- |
S59 |
--- |
S60 |
--- |
S61 |
--- |
S62 |
--- |
S63 |
Panic function. |
Switches
(keypads) labels correspond to diode matrix schematic.
Main
manual = manual A = HW.
Secondary
manual = manual B = RP.
All
couplers are active when appropriate contact (switch, keypad) is turned ON
(connected). Coupler is inactive when switch is turned OFF (disconnected).
Program
change messages are sent at the moment when keypad is pressed (contact
connected). When keypad is released, no any message is transmitted.
5) Program change
messages and musical instrument voices are noted in accordance with
General MIDI standard (GM). If your musical instrument does not complain GM
standard, voice assign may be other.
6) All transpose
changes made by Control panel switches are valid until T-ORGAN system shutdown.
After next startup, all transpose positions are defined by DIP switches
positions on system board.
© 1998-2022 AkordeonCentrum.cz